The stickers scan code sorting, CCD detection, double-sided automatic spot welding integrated equipment by belt line integration of feeding module, handling pressure components, laminationPad module, cell scanning code, 4+1 (NG) channel test, automatic sorting, material channel storage cell components, secondary scanning code, manual into cell support workbench, CCD positive and negative pole detection, manual put nickel sheet, double-sided automatic spot welding, manual operating table and other components.

Put the whole box of batteries into the belt line manually, and the belt line runs to the retaking mechanism, and ten electric cells are absorbed by the absorbing assembly and sent to the retaking Material turnover mechanism, take the material turnover grab after the material is turned over to the discharging belt area, the bottom screw drive components will be arranged to carry the battery to the bottom A process, and the subsequent cell flow closure; Move the electric core to the cutting position by the upper cylinder handling assembly, and the cutting die assembly will be cut Good highland barley paper is pasted on the positive extreme of the battery, and then the pasted battery flows into the belt after scanning code area for scanning code directly to the test Area, after the test is completed, the battery is sent to the sorting manipulator by the top charging cylinder, and the sorting manipulator will put the different battery into the corresponding feeding channel After that, the material channel is combined, and the code number is scanned twice to ensure that the data of each battery pack is accurately queried, the manual battery core is inserted into the shell, and the CCD is positive and negative polesDetection, after the completion of the detection into the manual put nickel sheet station, nickel sheet swing process, after the completion of this process manual into double-sided automatic spot welding;After spot welding is completed, it flows to the manual worktable, and the spot welding fixture is separated by manual, and transported to the manual fixture assembly station on the AGV material truck And so the cycle works.